Cassava Plant Soil Processing Machine
DOI:
https://doi.org/10.59890/ijist.v2i8.2481Keywords:
Cassava, Plant, MachineAbstract
The cassava tillage machine has a construction design for the frame, plowshares and wheels. In the frame design, the dimensions are ± 1.5 meters long, ± 1 meter wide and ± ½ meter high. For the plowshare design, there is a plowshare size, namely a height of 40 cm, a plowshare width of 38 cm and an angle of ± 35°. And the wheels are made from 16 ring rims with additional outer fins on 40 x 40 mm steel angled profile rims with a thickness of 2 mm. This machine uses a transmission system, namely two transmissions including (pulley with V-belt) and (sprocket with chain) on two shafts that connect each other to rotate the shaft so that the wheels rotate. This machine's transmission uses a type B small pulley with a diameter of 72 mm, a type B large pulley with a diameter of 203.2 mm, a small 420 gear with 14 teeth, and a large 420 gear with 42 teeth. For the V belt, type A belt is available with size 51 inches.
References
Ajib, M., & Habiburrahman Aksa, A. (2023). Dampak Perkembangan Teknologi Pertanian Terhadap Perubahan Sosial Masyarakat Petani. Al-I’timad: Jurnal Dakwah Dan Pengembangan Masyarakat Islam, 1(1), 19–41. https://doi.org/10.35878/alitimad.v1i1.725
Akbar, R., Siroj, R. A., Win Afgani, M., & Weriana. (2023). Experimental Reseacrch Dalam Metodologi Pendidikan. Jurnal Ilmiah Wahana Pendidikan, 9(Vol 9 No 2 (2023): Jurnal Ilmiah Wahana Pendidikan), 465–474. https://jurnal.peneliti.net/index.php/JIWP/article/view/3165
Aldillah, R. (2016). Kinerja Pemanfaatan Mekanisasi Pertanian dan Implikasinya dalam Upaya Percepatan Produksi Pangan di Indonesia. Forum Penelitian Agro Ekonomi, 34(2), 163. https://doi.org/10.21082/fae.v34n2.2016.163-171
Anggara, D. (2023). Pengembangan Teknik Mesin untuk Otomatisasi Proses Produksi. Laporan Kerja Praktek Mahasiswa Teknik. http://coursework.uma.ac.id/index.php/teknik/article/view/314
Ariningsih, E. (2018). Peningkatan Produksi Ubi Kayu Berbasis Kawasan di Provinsi Jawa Barat dan Sulawesi Selatan. Analisis Kebijakan Pertanian, 14(2), 125. https://doi.org/10.21082/akp.v14n2.2016.125-148
Budiawati, Y., Perdana, T., & Natawidjaya. (2016). Efficiency Analysis of the Use of Factors of Cassava Productio in Garut Regency. Jurnal Agribisnis Terpadu, 9(13), 1–17. https://jurnal.untirta.ac.id/index.php/jat/article/view/2498
Dr. Ramadoni Syahputra. (2020). Teknologi Pembangkit Tenaga Listrik. September, 9–11; 14–15. https://elektro.umy.ac.id/wp-content/uploads/2023/04/Ramadoni-Syahputra__Teknologi-Pembangkit-Tenaga-Listrik-DIKTAT.pdf
Hayat, A., Hia, E. E., & Tusyadyah, D. H. (2019). Rancang Bangun Aplikasi Petty Cash Berbasis Web Menggunakan Framework Laravel Pada PT. Bekasi Asri Pemula Tbk. ICIT Journal, 5(2), 130–140. https://doi.org/10.33050/icit.v5i2.423
Jasasila. (2017). 225486-Peningkatan-Mutu-Pemeliharaan-Mesin-Peng-5Dfcc0E7. 17(3), 96–102. https://media.neliti.com/media/publications/225486-peningkatan-mutu-pemeliharaan-mesin-peng-5dfcc0e7.pdf
Kaur, B., Mansi, Dimri, S., Singh, J., Mishra, S., Chauhan, N., Kukreti, T., Sharma, B., Singh, S. P., Arora, S., Uniyal, D., Agrawal, Y., Akhtar, S., Rather, M. A., Naik, B., Kumar, V., Gupta, A. K., Rustagi, S., & Preet, M. S. (2023). Insights into the harvesting tools and equipment’s for horticultural crops: From then to now. Journal of Agriculture and Food Research, 14(June), 100814. https://doi.org/10.1016/j.jafr.2023.100814
Pranadji, T., & Budianti, R. (2016). Kendala Penyerapan Peralatan Pertanian Mekanis di Jawa Timur. Forum Penelitian Agro Ekonomi, 6(1), 36. https://doi.org/10.21082/fae.v6n1.1988.36-43
Pujiriyani, D. W. (2022). Generasi baru petani wirausaha: Dinamika petani kecil dalam pertanian global. Tunas Agraria, 5(3), 254–267. https://doi.org/10.31292/jta.v5i3.195
Ratminingsih, N. M. (2010). Penelitian Eksperimental Dalam Pembelajaran Bahasa Kedua. Prasi, 6(11), 31–40. https://ejournal.undiksha.ac.id/index.php/PRASI/article/viewFile/6816/4664?__cf_chl_tk=5p9wBLF1mpoMp0upFlRs9pHXhRdOqohRrZshe9qSogI-1724923944-0.0.1.1-5076
Rivki, M., Bachtiar, A. M., Informatika, T., Teknik, F., & Indonesia, U. K. (n.d.). Sistem dan Manajemen Pemeliharaan (Issue 112). https://repository.usd.ac.id/41185/1/Buku Ajar _Sistem dan Manajemen Pemeliharaan_.pdf
Susilowati, E., Rezika, H. N., Rifaldo, M. I., Hidayat, T., & Muttaqien, D. D. (2024). Strategi Manajemen Inovasi Dan Kreatifitas Dalam Pengembangan Bisnis Kedai Kopi Imah Uing (IU). DIGIBE : Digital Business and Entrepreneurship Journal, 2(1), 17–26. https://journal.feb.uniku.ac.id/digibe/article/view/17
Waspiah, W., Arifin, R., Putri, N. M., Safarin, M. H. A. F., & Putri, D. D. P. (2022). Student Edited Law Journals: Strengthening the Creativity of Law Students in a Challenging Era. Journal of Creativity Student, 7(2), 133–154. https://doi.org/10.15294/jcs.v7i2.38493
